One for all
Quiet. Quieter. The mid-mounted motor.
The heart of your eBike retrofit kit for all types of bikes is the specially designed mid-mounted motor. You start the motor. You hear… nothing. The Pendix eDrive, the motor of progress, is absolutely noiseless. However, it is by no means weak, but particularly agile and powerful. And at the same time, it impresses with a pedalling motion that feels entirely natural.
Installation is available to most bikes at $120 per hour.. The Pendix system can only be supplied and fitted by a registered Pendix Dealer. it will take generally between 2.5 to 4 hours to install.
Noiseless and maintenance-free system
Optimum mounting position on the bicycle due to a mid-mounted motor
Water and dust resistant according to IP65
No pedal resistance with the motor switched off or empty battery
Can be combined with all gear systems
Full load ahead
With the Pendix eDrive, you experience a completely new riding experience. You are going to want to ride as much as possible.
The Pendix Kit is available with two battery option (Battery sold separately) – the eDrive300 (300 Wh) and the eDrive500 (500 Wh).
It is quite easy to charge. You release the battery from its holder with only one hand movement. Now simply place it on the included charging station and your eDrive is ready for use again within a very short time.
You will also require a 104BCD / 4 Bolt Chainring to suit the style of bike, and the intended use (sold seperately) . We recommend a 32 tooth for heavier cargo bikes, 36 for lighter and up to 40 for non cargo bikes.
Drive
Drive: brushless bottom bracket motor
Power: 250 W nominal*
Speed :(max) 25 km/h**
Drive modes: 3
Torque :(max) 50 Nm
Battery
Battery type :lithium-ion (removable)
Capacity: 300 Wh / 500 Wh
Voltage :48 V
Charging time: 3 h*** / 3 h 20 min****
Range optimal: ***** 45-105 km / 69-160 km
Support
Wheel sizes: all sizes supports frame
Sizes: all with standard construction measures and bottom bracket using BSA 68 mm/73 mm
standard threads
Dimensions
Additional weight: 6.5 kg / 6.9 kg
Dimensions battery: 80 x 276 mm (D x H) / 80 x 342 mm (D x H)
Dimensions actuator: 292 x 206 x 50 mm (W x H x D)
* Reference Germany (250 watt for EU countries)
** higher speeds possible with pure muscle strength
*** with 2,2 A charging current
**** with 3,6 A charging current
***** depending on the cyclist, riding style, topography, motor setting and bicycle type
IMPORTANT NOTES :
This is the Motor kit only, and the correct kit should be chosen on the length of the Battery cable (250 mm/ 500mm/ 950) required to suit the intended bike. You will also require a Pendix Battery and a Chainring
